// SPDX-License-Identifier: BUSL-1.1
pragma solidity =0.7.6;

import './Constants.sol';

/// @title AdaptiveFee
/// @notice Calculates fee based on combination of sigmoids
library AdaptiveFee {
  // alpha1 + alpha2 + baseFee must be <= type(uint16).max
  struct Configuration {
    uint16 alpha1; // max value of the first sigmoid
    uint16 alpha2; // max value of the second sigmoid
    uint32 beta1; // shift along the x-axis for the first sigmoid
    uint32 beta2; // shift along the x-axis for the second sigmoid
    uint16 gamma1; // horizontal stretch factor for the first sigmoid
    uint16 gamma2; // horizontal stretch factor for the second sigmoid
    uint32 volumeBeta; // shift along the x-axis for the outer volume-sigmoid
    uint16 volumeGamma; // horizontal stretch factor the outer volume-sigmoid
    uint16 baseFee; // minimum possible fee
  }

  /// @notice Calculates fee based on formula:
  /// baseFee + sigmoidVolume(sigmoid1(volatility, volumePerLiquidity) + sigmoid2(volatility, volumePerLiquidity))
  /// maximum value capped by baseFee + alpha1 + alpha2
  function getFee(
    uint88 volatility,
    uint256 volumePerLiquidity,
    Configuration memory config
  ) internal pure returns (uint16 fee) {
    uint256 sumOfSigmoids = sigmoid(volatility, config.gamma1, config.alpha1, config.beta1) +
      sigmoid(volatility, config.gamma2, config.alpha2, config.beta2);

    if (sumOfSigmoids > type(uint16).max) {
      // should be impossible, just in case
      sumOfSigmoids = type(uint16).max;
    }

    return uint16(config.baseFee + sigmoid(volumePerLiquidity, config.volumeGamma, uint16(sumOfSigmoids), config.volumeBeta)); // safe since alpha1 + alpha2 + baseFee _must_ be <= type(uint16).max
  }

  /// @notice calculates α / (1 + e^( (β-x) / γ))
  /// that is a sigmoid with a maximum value of α, x-shifted by β, and stretched by γ
  /// @dev returns uint256 for fuzzy testing. Guaranteed that the result is not greater than alpha
  function sigmoid(
    uint256 x,
    uint16 g,
    uint16 alpha,
    uint256 beta
  ) internal pure returns (uint256 res) {
    if (x > beta) {
      x = x - beta;
      if (x >= 6 * uint256(g)) return alpha; // so x < 19 bits
      uint256 g8 = uint256(g)**8; // < 128 bits (8*16)
      uint256 ex = exp(x, g, g8); // < 155 bits
      res = (alpha * ex) / (g8 + ex); // in worst case: (16 + 155 bits) / 155 bits
      // so res <= alpha
    } else {
      x = beta - x;
      if (x >= 6 * uint256(g)) return 0; // so x < 19 bits
      uint256 g8 = uint256(g)**8; // < 128 bits (8*16)
      uint256 ex = g8 + exp(x, g, g8); // < 156 bits
      res = (alpha * g8) / ex; // in worst case: (16 + 128 bits) / 156 bits
      // g8 <= ex, so res <= alpha
    }
  }

  /// @notice calculates e^(x/g) * g^8 in a series, since (around zero):
  /// e^x = 1 + x + x^2/2 + ... + x^n/n! + ...
  /// e^(x/g) = 1 + x/g + x^2/(2*g^2) + ... + x^(n)/(g^n * n!) + ...
  function exp(
    uint256 x,
    uint16 g,
    uint256 gHighestDegree
  ) internal pure returns (uint256 res) {
    // calculating:
    // g**8 + x * g**7 + (x**2 * g**6) / 2 + (x**3 * g**5) / 6 + (x**4 * g**4) / 24 + (x**5 * g**3) / 120 + (x**6 * g^2) / 720 + x**7 * g / 5040 + x**8 / 40320

    // x**8 < 152 bits (19*8) and g**8 < 128 bits (8*16)
    // so each summand < 152 bits and res < 155 bits
    uint256 xLowestDegree = x;
    res = gHighestDegree; // g**8

    gHighestDegree /= g; // g**7
    res += xLowestDegree * gHighestDegree;

    gHighestDegree /= g; // g**6
    xLowestDegree *= x; // x**2
    res += (xLowestDegree * gHighestDegree) / 2;

    gHighestDegree /= g; // g**5
    xLowestDegree *= x; // x**3
    res += (xLowestDegree * gHighestDegree) / 6;

    gHighestDegree /= g; // g**4
    xLowestDegree *= x; // x**4
    res += (xLowestDegree * gHighestDegree) / 24;

    gHighestDegree /= g; // g**3
    xLowestDegree *= x; // x**5
    res += (xLowestDegree * gHighestDegree) / 120;

    gHighestDegree /= g; // g**2
    xLowestDegree *= x; // x**6
    res += (xLowestDegree * gHighestDegree) / 720;

    xLowestDegree *= x; // x**7
    res += (xLowestDegree * g) / 5040 + (xLowestDegree * x) / (40320);
  }
}

// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity =0.7.6;

/// @title Function for getting block timestamp
/// @dev Base contract that is overridden for tests
abstract contract BlockTimestamp {
    /// @dev Method that exists purely to be overridden for tests
    /// @return The current block timestamp
    function _blockTimestamp() internal view virtual returns (uint256) {
        return block.timestamp;
    }
}

// SPDX-License-Identifier: GPL-2.0-or-later
/**
 * @title Solidity Bytes Arrays Utils
 * @author Gonçalo Sá <goncalo.sa@consensys.net>
 *
 * @dev Bytes tightly packed arrays utility library for ethereum contracts written in Solidity.
 *     The library lets you concatenate, slice and type cast bytes arrays both in memory and storage.
 */
pragma solidity >=0.5.0 <0.8.0;

library BytesLib {
    function slice(bytes memory _bytes, uint256 _start, uint256 _length) internal pure returns (bytes memory) {
        require(_length + 31 >= _length, 'slice_overflow');
        require(_start + _length >= _start, 'slice_overflow');
        require(_bytes.length >= _start + _length, 'slice_outOfBounds');

        bytes memory tempBytes;

        assembly {
            switch iszero(_length)
            case 0 {
                // Get a location of some free memory and store it in tempBytes as
                // Solidity does for memory variables.
                tempBytes := mload(0x40)

                // The first word of the slice result is potentially a partial
                // word read from the original array. To read it, we calculate
                // the length of that partial word and start copying that many
                // bytes into the array. The first word we copy will start with
                // data we don't care about, but the last `lengthmod` bytes will
                // land at the beginning of the contents of the new array. When
                // we're done copying, we overwrite the full first word with
                // the actual length of the slice.
                let lengthmod := and(_length, 31)

                // The multiplication in the next line is necessary
                // because when slicing multiples of 32 bytes (lengthmod == 0)
                // the following copy loop was copying the origin's length
                // and then ending prematurely not copying everything it should.
                let mc := add(add(tempBytes, lengthmod), mul(0x20, iszero(lengthmod)))
                let end := add(mc, _length)

                for {
                    // The multiplication in the next line has the same exact purpose
                    // as the one above.
                    let cc := add(add(add(_bytes, lengthmod), mul(0x20, iszero(lengthmod))), _start)
                } lt(mc, end) {
                    mc := add(mc, 0x20)
                    cc := add(cc, 0x20)
                } {
                    mstore(mc, mload(cc))
                }

                mstore(tempBytes, _length)

                //update free-memory pointer
                //allocating the array padded to 32 bytes like the compiler does now
                mstore(0x40, and(add(mc, 31), not(31)))
            }
            //if we want a zero-length slice let's just return a zero-length array
            default {
                tempBytes := mload(0x40)
                //zero out the 32 bytes slice we are about to return
                //we need to do it because Solidity does not garbage collect
                mstore(tempBytes, 0)

                mstore(0x40, add(tempBytes, 0x20))
            }
        }

        return tempBytes;
    }

    function toAddress(bytes memory _bytes, uint256 _start) internal pure returns (address) {
        require(_start + 20 >= _start, 'toAddress_overflow');
        require(_bytes.length >= _start + 20, 'toAddress_outOfBounds');
        address tempAddress;

        assembly {
            tempAddress := div(mload(add(add(_bytes, 0x20), _start)), 0x1000000000000000000000000)
        }

        return tempAddress;
    }

    function toUint24(bytes memory _bytes, uint256 _start) internal pure returns (uint24) {
        require(_start + 3 >= _start, 'toUint24_overflow');
        require(_bytes.length >= _start + 3, 'toUint24_outOfBounds');
        uint24 tempUint;

        assembly {
            tempUint := mload(add(add(_bytes, 0x3), _start))
        }

        return tempUint;
    }
}

// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity =0.7.6;

import '@cryptoalgebra/core/contracts/interfaces/IAlgebraPool.sol';
import './PoolAddress.sol';

/// @notice Provides validation for callbacks from Algebra Pools
/// @dev Credit to Uniswap Labs under GPL-2.0-or-later license:
/// https://github.com/Uniswap/v3-periphery
library CallbackValidation {
    /// @notice Returns the address of a valid Algebra Pool
    /// @param poolDeployer The contract address of the Algebra pool deployer
    /// @param tokenA The contract address of either token0 or token1
    /// @param tokenB The contract address of the other token
    /// @return pool The V3 pool contract address
    function verifyCallback(
        address poolDeployer,
        address tokenA,
        address tokenB
    ) internal view returns (IAlgebraPool pool) {
        return verifyCallback(poolDeployer, PoolAddress.getPoolKey(tokenA, tokenB));
    }

    /// @notice Returns the address of a valid Algebra Pool
    /// @param poolDeployer The contract address of the Algebra pool deployer
    /// @param poolKey The identifying key of the V3 pool
    /// @return pool The V3 pool contract address
    function verifyCallback(address poolDeployer, PoolAddress.PoolKey memory poolKey)
        internal
        view
        returns (IAlgebraPool pool)
    {
        pool = IAlgebraPool(PoolAddress.computeAddress(poolDeployer, poolKey));
        require(msg.sender == address(pool));
    }
}

// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity =0.7.6;

library Constants {
  uint8 internal constant RESOLUTION = 96;
  uint256 internal constant Q96 = 0x1000000000000000000000000;
  uint256 internal constant Q128 = 0x100000000000000000000000000000000;
  // fee value in hundredths of a bip, i.e. 1e-6
  uint16 internal constant BASE_FEE = 100;
  int24 internal constant MAX_TICK_SPACING = 500;

  // max(uint128) / (MAX_TICK - MIN_TICK)
  uint128 internal constant MAX_LIQUIDITY_PER_TICK = 191757638537527648490752896198553;

  uint32 internal constant MAX_LIQUIDITY_COOLDOWN = 1 days;
  uint8 internal constant MAX_COMMUNITY_FEE = 250;
  uint256 internal constant COMMUNITY_FEE_DENOMINATOR = 1000;
}

// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.5.0;

import './pool/IAlgebraPoolImmutables.sol';
import './pool/IAlgebraPoolState.sol';
import './pool/IAlgebraPoolDerivedState.sol';
import './pool/IAlgebraPoolActions.sol';
import './pool/IAlgebraPoolPermissionedActions.sol';
import './pool/IAlgebraPoolEvents.sol';

/**
 * @title The interface for a Algebra Pool
 * @dev The pool interface is broken up into many smaller pieces.
 * Credit to Uniswap Labs under GPL-2.0-or-later license:
 * https://github.com/Uniswap/v3-core/tree/main/contracts/interfaces
 */
interface IAlgebraPool is
  IAlgebraPoolImmutables,
  IAlgebraPoolState,
  IAlgebraPoolDerivedState,
  IAlgebraPoolActions,
  IAlgebraPoolPermissionedActions,
  IAlgebraPoolEvents
{
  // used only for combining interfaces
}

// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.5.0;

/// @title Permissionless pool actions
/// @dev Credit to Uniswap Labs under GPL-2.0-or-later license:
/// https://github.com/Uniswap/v3-core/tree/main/contracts/interfaces
interface IAlgebraPoolActions {
  /**
   * @notice Sets the initial price for the pool
   * @dev Price is represented as a sqrt(amountToken1/amountToken0) Q64.96 value
   * @param price the initial sqrt price of the pool as a Q64.96
   */
  function initialize(uint160 price) external;

  /**
   * @notice Adds liquidity for the given recipient/bottomTick/topTick position
   * @dev The caller of this method receives a callback in the form of IAlgebraMintCallback# AlgebraMintCallback
   * in which they must pay any token0 or token1 owed for the liquidity. The amount of token0/token1 due depends
   * on bottomTick, topTick, the amount of liquidity, and the current price.
   * @param sender The address which will receive potential surplus of paid tokens
   * @param recipient The address for which the liquidity will be created
   * @param bottomTick The lower tick of the position in which to add liquidity
   * @param topTick The upper tick of the position in which to add liquidity
   * @param amount The desired amount of liquidity to mint
   * @param data Any data that should be passed through to the callback
   * @return amount0 The amount of token0 that was paid to mint the given amount of liquidity. Matches the value in the callback
   * @return amount1 The amount of token1 that was paid to mint the given amount of liquidity. Matches the value in the callback
   * @return liquidityActual The actual minted amount of liquidity
   */
  function mint(
    address sender,
    address recipient,
    int24 bottomTick,
    int24 topTick,
    uint128 amount,
    bytes calldata data
  )
    external
    returns (
      uint256 amount0,
      uint256 amount1,
      uint128 liquidityActual
    );

  /**
   * @notice Collects tokens owed to a position
   * @dev Does not recompute fees earned, which must be done either via mint or burn of any amount of liquidity.
   * Collect must be called by the position owner. To withdraw only token0 or only token1, amount0Requested or
   * amount1Requested may be set to zero. To withdraw all tokens owed, caller may pass any value greater than the
   * actual tokens owed, e.g. type(uint128).max. Tokens owed may be from accumulated swap fees or burned liquidity.
   * @param recipient The address which should receive the fees collected
   * @param bottomTick The lower tick of the position for which to collect fees
   * @param topTick The upper tick of the position for which to collect fees
   * @param amount0Requested How much token0 should be withdrawn from the fees owed
   * @param amount1Requested How much token1 should be withdrawn from the fees owed
   * @return amount0 The amount of fees collected in token0
   * @return amount1 The amount of fees collected in token1
   */
  function collect(
    address recipient,
    int24 bottomTick,
    int24 topTick,
    uint128 amount0Requested,
    uint128 amount1Requested
  ) external returns (uint128 amount0, uint128 amount1);

  /**
   * @notice Burn liquidity from the sender and account tokens owed for the liquidity to the position
   * @dev Can be used to trigger a recalculation of fees owed to a position by calling with an amount of 0
   * @dev Fees must be collected separately via a call to #collect
   * @param bottomTick The lower tick of the position for which to burn liquidity
   * @param topTick The upper tick of the position for which to burn liquidity
   * @param amount How much liquidity to burn
   * @return amount0 The amount of token0 sent to the recipient
   * @return amount1 The amount of token1 sent to the recipient
   */
  function burn(
    int24 bottomTick,
    int24 topTick,
    uint128 amount
  ) external returns (uint256 amount0, uint256 amount1);

  /**
   * @notice Swap token0 for token1, or token1 for token0
   * @dev The caller of this method receives a callback in the form of IAlgebraSwapCallback# AlgebraSwapCallback
   * @param recipient The address to receive the output of the swap
   * @param zeroToOne The direction of the swap, true for token0 to token1, false for token1 to token0
   * @param amountSpecified The amount of the swap, which implicitly configures the swap as exact input (positive), or exact output (negative)
   * @param limitSqrtPrice The Q64.96 sqrt price limit. If zero for one, the price cannot be less than this
   * value after the swap. If one for zero, the price cannot be greater than this value after the swap
   * @param data Any data to be passed through to the callback. If using the Router it should contain
   * SwapRouter#SwapCallbackData
   * @return amount0 The delta of the balance of token0 of the pool, exact when negative, minimum when positive
   * @return amount1 The delta of the balance of token1 of the pool, exact when negative, minimum when positive
   */
  function swap(
    address recipient,
    bool zeroToOne,
    int256 amountSpecified,
    uint160 limitSqrtPrice,
    bytes calldata data
  ) external returns (int256 amount0, int256 amount1);

  /**
   * @notice Swap token0 for token1, or token1 for token0 (tokens that have fee on transfer)
   * @dev The caller of this method receives a callback in the form of I AlgebraSwapCallback# AlgebraSwapCallback
   * @param sender The address called this function (Comes from the Router)
   * @param recipient The address to receive the output of the swap
   * @param zeroToOne The direction of the swap, true for token0 to token1, false for token1 to token0
   * @param amountSpecified The amount of the swap, which implicitly configures the swap as exact input (positive), or exact output (negative)
   * @param limitSqrtPrice The Q64.96 sqrt price limit. If zero for one, the price cannot be less than this
   * value after the swap. If one for zero, the price cannot be greater than this value after the swap
   * @param data Any data to be passed through to the callback. If using the Router it should contain
   * SwapRouter#SwapCallbackData
   * @return amount0 The delta of the balance of token0 of the pool, exact when negative, minimum when positive
   * @return amount1 The delta of the balance of token1 of the pool, exact when negative, minimum when positive
   */
  function swapSupportingFeeOnInputTokens(
    address sender,
    address recipient,
    bool zeroToOne,
    int256 amountSpecified,
    uint160 limitSqrtPrice,
    bytes calldata data
  ) external returns (int256 amount0, int256 amount1);

  /**
   * @notice Receive token0 and/or token1 and pay it back, plus a fee, in the callback
   * @dev The caller of this method receives a callback in the form of IAlgebraFlashCallback# AlgebraFlashCallback
   * @dev All excess tokens paid in the callback are distributed to liquidity providers as an additional fee. So this method can be used
   * to donate underlying tokens to currently in-range liquidity providers by calling with 0 amount{0,1} and sending
   * the donation amount(s) from the callback
   * @param recipient The address which will receive the token0 and token1 amounts
   * @param amount0 The amount of token0 to send
   * @param amount1 The amount of token1 to send
   * @param data Any data to be passed through to the callback
   */
  function flash(
    address recipient,
    uint256 amount0,
    uint256 amount1,
    bytes calldata data
  ) external;
}

// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.5.0;

/**
 * @title Pool state that is not stored
 * @notice Contains view functions to provide information about the pool that is computed rather than stored on the
 * blockchain. The functions here may have variable gas costs.
 * @dev Credit to Uniswap Labs under GPL-2.0-or-later license:
 * https://github.com/Uniswap/v3-core/tree/main/contracts/interfaces
 */
interface IAlgebraPoolDerivedState {
  /**
   * @notice Returns the cumulative tick and liquidity as of each timestamp `secondsAgo` from the current block timestamp
   * @dev To get a time weighted average tick or liquidity-in-range, you must call this with two values, one representing
   * the beginning of the period and another for the end of the period. E.g., to get the last hour time-weighted average tick,
   * you must call it with secondsAgos = [3600, 0].
   * @dev The time weighted average tick represents the geometric time weighted average price of the pool, in
   * log base sqrt(1.0001) of token1 / token0. The TickMath library can be used to go from a tick value to a ratio.
   * @param secondsAgos From how long ago each cumulative tick and liquidity value should be returned
   * @return tickCumulatives Cumulative tick values as of each `secondsAgos` from the current block timestamp
   * @return secondsPerLiquidityCumulatives Cumulative seconds per liquidity-in-range value as of each `secondsAgos`
   * from the current block timestamp
   * @return volatilityCumulatives Cumulative standard deviation as of each `secondsAgos`
   * @return volumePerAvgLiquiditys Cumulative swap volume per liquidity as of each `secondsAgos`
   */
  function getTimepoints(uint32[] calldata secondsAgos)
    external
    view
    returns (
      int56[] memory tickCumulatives,
      uint160[] memory secondsPerLiquidityCumulatives,
      uint112[] memory volatilityCumulatives,
      uint256[] memory volumePerAvgLiquiditys
    );

  /**
   * @notice Returns a snapshot of the tick cumulative, seconds per liquidity and seconds inside a tick range
   * @dev Snapshots must only be compared to other snapshots, taken over a period for which a position existed.
   * I.e., snapshots cannot be compared if a position is not held for the entire period between when the first
   * snapshot is taken and the second snapshot is taken.
   * @param bottomTick The lower tick of the range
   * @param topTick The upper tick of the range
   * @return innerTickCumulative The snapshot of the tick accumulator for the range
   * @return innerSecondsSpentPerLiquidity The snapshot of seconds per liquidity for the range
   * @return innerSecondsSpent The snapshot of the number of seconds during which the price was in this range
   */
  function getInnerCumulatives(int24 bottomTick, int24 topTick)
    external
    view
    returns (
      int56 innerTickCumulative,
      uint160 innerSecondsSpentPerLiquidity,
      uint32 innerSecondsSpent
    );
}

// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.5.0;

/// @title Events emitted by a pool
/// @dev Credit to Uniswap Labs under GPL-2.0-or-later license:
/// https://github.com/Uniswap/v3-core/tree/main/contracts/interfaces
interface IAlgebraPoolEvents {
  /**
   * @notice Emitted exactly once by a pool when #initialize is first called on the pool
   * @dev Mint/Burn/Swap cannot be emitted by the pool before Initialize
   * @param price The initial sqrt price of the pool, as a Q64.96
   * @param tick The initial tick of the pool, i.e. log base 1.0001 of the starting price of the pool
   */
  event Initialize(uint160 price, int24 tick);

  /**
   * @notice Emitted when liquidity is minted for a given position
   * @param sender The address that minted the liquidity
   * @param owner The owner of the position and recipient of any minted liquidity
   * @param bottomTick The lower tick of the position
   * @param topTick The upper tick of the position
   * @param liquidityAmount The amount of liquidity minted to the position range
   * @param amount0 How much token0 was required for the minted liquidity
   * @param amount1 How much token1 was required for the minted liquidity
   */
  event Mint(
    address sender,
    address indexed owner,
    int24 indexed bottomTick,
    int24 indexed topTick,
    uint128 liquidityAmount,
    uint256 amount0,
    uint256 amount1
  );

  /**
   * @notice Emitted when fees are collected by the owner of a position
   * @dev Collect events may be emitted with zero amount0 and amount1 when the caller chooses not to collect fees
   * @param owner The owner of the position for which fees are collected
   * @param recipient The address that received fees
   * @param bottomTick The lower tick of the position
   * @param topTick The upper tick of the position
   * @param amount0 The amount of token0 fees collected
   * @param amount1 The amount of token1 fees collected
   */
  event Collect(address indexed owner, address recipient, int24 indexed bottomTick, int24 indexed topTick, uint128 amount0, uint128 amount1);

  /**
   * @notice Emitted when a position's liquidity is removed
   * @dev Does not withdraw any fees earned by the liquidity position, which must be withdrawn via #collect
   * @param owner The owner of the position for which liquidity is removed
   * @param bottomTick The lower tick of the position
   * @param topTick The upper tick of the position
   * @param liquidityAmount The amount of liquidity to remove
   * @param amount0 The amount of token0 withdrawn
   * @param amount1 The amount of token1 withdrawn
   */
  event Burn(address indexed owner, int24 indexed bottomTick, int24 indexed topTick, uint128 liquidityAmount, uint256 amount0, uint256 amount1);

  /**
   * @notice Emitted by the pool for any swaps between token0 and token1
   * @param sender The address that initiated the swap call, and that received the callback
   * @param recipient The address that received the output of the swap
   * @param amount0 The delta of the token0 balance of the pool
   * @param amount1 The delta of the token1 balance of the pool
   * @param price The sqrt(price) of the pool after the swap, as a Q64.96
   * @param liquidity The liquidity of the pool after the swap
   * @param tick The log base 1.0001 of price of the pool after the swap
   */
  event Swap(address indexed sender, address indexed recipient, int256 amount0, int256 amount1, uint160 price, uint128 liquidity, int24 tick);

  /**
   * @notice Emitted by the pool for any flashes of token0/token1
   * @param sender The address that initiated the swap call, and that received the callback
   * @param recipient The address that received the tokens from flash
   * @param amount0 The amount of token0 that was flashed
   * @param amount1 The amount of token1 that was flashed
   * @param paid0 The amount of token0 paid for the flash, which can exceed the amount0 plus the fee
   * @param paid1 The amount of token1 paid for the flash, which can exceed the amount1 plus the fee
   */
  event Flash(address indexed sender, address indexed recipient, uint256 amount0, uint256 amount1, uint256 paid0, uint256 paid1);

  /**
   * @notice Emitted when the community fee is changed by the pool
   * @param communityFee0New The updated value of the token0 community fee percent
   * @param communityFee1New The updated value of the token1 community fee percent
   */
  event CommunityFee(uint8 communityFee0New, uint8 communityFee1New);

  /**
   * @notice Emitted when the tick spacing changes
   * @param newTickSpacing The updated value of the new tick spacing
   */
  event TickSpacing(int24 newTickSpacing);

  /**
   * @notice Emitted when new activeIncentive is set
   * @param virtualPoolAddress The address of a virtual pool associated with the current active incentive
   */
  event Incentive(address indexed virtualPoolAddress);

  /**
   * @notice Emitted when the fee changes
   * @param feeZto The value of the token fee for zto swaps
   * @param feeOtz The value of the token fee for otz swaps
   */
  event Fee(uint16 feeZto, uint16 feeOtz);

  /**
   * @notice Emitted when the LiquidityCooldown changes
   * @param liquidityCooldown The value of locktime for added liquidity
   */
  event LiquidityCooldown(uint32 liquidityCooldown);
}

// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.5.0;

import '../IDataStorageOperator.sol';

/// @title Pool state that never changes
/// @dev Credit to Uniswap Labs under GPL-2.0-or-later license:
/// https://github.com/Uniswap/v3-core/tree/main/contracts/interfaces
interface IAlgebraPoolImmutables {
  /**
   * @notice The contract that stores all the timepoints and can perform actions with them
   * @return The operator address
   */
  function dataStorageOperator() external view returns (address);

  /**
   * @notice The contract that deployed the pool, which must adhere to the IAlgebraFactory interface
   * @return The contract address
   */
  function factory() external view returns (address);

  /**
   * @notice The first of the two tokens of the pool, sorted by address
   * @return The token contract address
   */
  function token0() external view returns (address);

  /**
   * @notice The second of the two tokens of the pool, sorted by address
   * @return The token contract address
   */
  function token1() external view returns (address);

  /**
   * @notice The maximum amount of position liquidity that can use any tick in the range
   * @dev This parameter is enforced per tick to prevent liquidity from overflowing a uint128 at any point, and
   * also prevents out-of-range liquidity from being used to prevent adding in-range liquidity to a pool
   * @return The max amount of liquidity per tick
   */
  function maxLiquidityPerTick() external view returns (uint128);
}

// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.5.0;

/**
 * @title Permissioned pool actions
 * @notice Contains pool methods that may only be called by the factory owner or tokenomics
 * @dev Credit to Uniswap Labs under GPL-2.0-or-later license:
 * https://github.com/Uniswap/v3-core/tree/main/contracts/interfaces
 */
interface IAlgebraPoolPermissionedActions {
  /**
   * @notice Set the community's % share of the fees. Cannot exceed 25% (250)
   * @param communityFee0 new community fee percent for token0 of the pool in thousandths (1e-3)
   * @param communityFee1 new community fee percent for token1 of the pool in thousandths (1e-3)
   */
  function setCommunityFee(uint8 communityFee0, uint8 communityFee1) external;

  /// @notice Set the new tick spacing values. Only factory owner
  /// @param newTickSpacing The new tick spacing value
  function setTickSpacing(int24 newTickSpacing) external;

  /**
   * @notice Sets an active incentive
   * @param virtualPoolAddress The address of a virtual pool associated with the incentive
   */
  function setIncentive(address virtualPoolAddress) external;

  /**
   * @notice Sets new lock time for added liquidity
   * @param newLiquidityCooldown The time in seconds
   */
  function setLiquidityCooldown(uint32 newLiquidityCooldown) external;
}

// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.5.0;

/// @title Pool state that can change
/// @dev Credit to Uniswap Labs under GPL-2.0-or-later license:
/// https://github.com/Uniswap/v3-core/tree/main/contracts/interfaces
interface IAlgebraPoolState {
  /**
   * @notice The globalState structure in the pool stores many values but requires only one slot
   * and is exposed as a single method to save gas when accessed externally.
   * @return price The current price of the pool as a sqrt(token1/token0) Q64.96 value;
   * Returns tick The current tick of the pool, i.e. according to the last tick transition that was run;
   * Returns This value may not always be equal to SqrtTickMath.getTickAtSqrtRatio(price) if the price is on a tick
   * boundary;
   * Returns feeZto The last pool fee value for ZtO swaps in hundredths of a bip, i.e. 1e-6;
   * Returns feeOtz The last pool fee value for OtZ swaps in hundredths of a bip, i.e. 1e-6;
   * Returns timepointIndex The index of the last written timepoint;
   * Returns communityFeeToken0 The community fee percentage of the swap fee in thousandths (1e-3) for token0;
   * Returns communityFeeToken1 The community fee percentage of the swap fee in thousandths (1e-3) for token1;
   * Returns unlocked Whether the pool is currently locked to reentrancy;
   */
  function globalState()
    external
    view
    returns (
      uint160 price,
      int24 tick,
      uint16 feeZto,
      uint16 feeOtz,
      uint16 timepointIndex,
      uint8 communityFeeToken0,
      uint8 communityFeeToken1,
      bool unlocked
    );

  /**
   * @notice The fee growth as a Q128.128 fees of token0 collected per unit of liquidity for the entire life of the pool
   * @dev This value can overflow the uint256
   */
  function totalFeeGrowth0Token() external view returns (uint256);

  /**
   * @notice The fee growth as a Q128.128 fees of token1 collected per unit of liquidity for the entire life of the pool
   * @dev This value can overflow the uint256
   */
  function totalFeeGrowth1Token() external view returns (uint256);

  /**
   * @notice The currently in range liquidity available to the pool
   * @dev This value has no relationship to the total liquidity across all ticks.
   * Returned value cannot exceed type(uint128).max
   */
  function liquidity() external view returns (uint128);

  /**
   * @notice Look up information about a specific tick in the pool
   * @dev This is a public structure, so the `return` natspec tags are omitted.
   * @param tick The tick to look up
   * @return liquidityTotal the total amount of position liquidity that uses the pool either as tick lower or
   * tick upper;
   * Returns liquidityDelta how much liquidity changes when the pool price crosses the tick;
   * Returns outerFeeGrowth0Token the fee growth on the other side of the tick from the current tick in token0;
   * Returns outerFeeGrowth1Token the fee growth on the other side of the tick from the current tick in token1;
   * Returns outerTickCumulative the cumulative tick value on the other side of the tick from the current tick;
   * Returns outerSecondsPerLiquidity the seconds spent per liquidity on the other side of the tick from the current tick;
   * Returns outerSecondsSpent the seconds spent on the other side of the tick from the current tick;
   * Returns initialized Set to true if the tick is initialized, i.e. liquidityTotal is greater than 0
   * otherwise equal to false. Outside values can only be used if the tick is initialized.
   * In addition, these values are only relative and must be used only in comparison to previous snapshots for
   * a specific position.
   */
  function ticks(int24 tick)
    external
    view
    returns (
      uint128 liquidityTotal,
      int128 liquidityDelta,
      uint256 outerFeeGrowth0Token,
      uint256 outerFeeGrowth1Token,
      int56 outerTickCumulative,
      uint160 outerSecondsPerLiquidity,
      uint32 outerSecondsSpent,
      bool initialized
    );

  /** @notice Returns 256 packed tick initialized boolean values. See TickTable for more information */
  function tickTable(int16 wordPosition) external view returns (uint256);

  /**
   * @notice Returns the information about a position by the position's key
   * @dev This is a public mapping of structures, so the `return` natspec tags are omitted.
   * @param key The position's key is a hash of a preimage composed by the owner, bottomTick and topTick
   * @return liquidityAmount The amount of liquidity in the position;
   * Returns lastLiquidityAddTimestamp Timestamp of last adding of liquidity;
   * Returns innerFeeGrowth0Token Fee growth of token0 inside the tick range as of the last mint/burn/poke;
   * Returns innerFeeGrowth1Token Fee growth of token1 inside the tick range as of the last mint/burn/poke;
   * Returns fees0 The computed amount of token0 owed to the position as of the last mint/burn/poke;
   * Returns fees1 The computed amount of token1 owed to the position as of the last mint/burn/poke
   */
  function positions(bytes32 key)
    external
    view
    returns (
      uint128 liquidityAmount,
      uint32 lastLiquidityAddTimestamp,
      uint256 innerFeeGrowth0Token,
      uint256 innerFeeGrowth1Token,
      uint128 fees0,
      uint128 fees1
    );

  /**
   * @notice Returns data about a specific timepoint index
   * @param index The element of the timepoints array to fetch
   * @dev You most likely want to use #getTimepoints() instead of this method to get an timepoint as of some amount of time
   * ago, rather than at a specific index in the array.
   * This is a public mapping of structures, so the `return` natspec tags are omitted.
   * @return initialized whether the timepoint has been initialized and the values are safe to use;
   * Returns blockTimestamp The timestamp of the timepoint;
   * Returns tickCumulative the tick multiplied by seconds elapsed for the life of the pool as of the timepoint timestamp;
   * Returns secondsPerLiquidityCumulative the seconds per in range liquidity for the life of the pool as of the timepoint timestamp;
   * Returns volatilityCumulative Cumulative standard deviation for the life of the pool as of the timepoint timestamp;
   * Returns averageTick Time-weighted average tick;
   * Returns volumePerLiquidityCumulative Cumulative swap volume per liquidity for the life of the pool as of the timepoint timestamp;
   */
  function timepoints(uint256 index)
    external
    view
    returns (
      bool initialized,
      uint32 blockTimestamp,
      int56 tickCumulative,
      uint160 secondsPerLiquidityCumulative,
      uint88 volatilityCumulative,
      int24 averageTick,
      uint144 volumePerLiquidityCumulative
    );

  /**
   * @notice Returns the information about active incentive
   * @dev if there is no active incentive at the moment, virtualPool,endTimestamp,startTimestamp would be equal to 0
   * @return virtualPool The address of a virtual pool associated with the current active incentive
   */
  function activeIncentive() external view returns (address virtualPool);

  /**
   * @notice Returns the lock time for added liquidity
   */
  function liquidityCooldown() external view returns (uint32 cooldownInSeconds);

  /**
   * @notice The pool tick spacing
   * @dev Ticks can only be used at multiples of this value
   * e.g.: a tickSpacing of 60 means ticks can be initialized every 60th tick, i.e., ..., -120, -60, 0, 60, 120, ...
   * This value is an int24 to avoid casting even though it is always positive.
   * @return The tick spacing
   */
  function tickSpacing() external view returns (int24);
}

// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.5.0;

/// @title Callback for IAlgebraPoolActions#swap
/// @notice Any contract that calls IAlgebraPoolActions#swap must implement this interface
/// @dev Credit to Uniswap Labs under GPL-2.0-or-later license:
/// https://github.com/Uniswap/v3-core/tree/main/contracts/interfaces
interface IAlgebraSwapCallback {
  /// @notice Called to `msg.sender` after executing a swap via IAlgebraPool#swap.
  /// @dev In the implementation you must pay the pool tokens owed for the swap.
  /// The caller of this method must be checked to be a AlgebraPool deployed by the canonical AlgebraFactory.
  /// amount0Delta and amount1Delta can both be 0 if no tokens were swapped.
  /// @param amount0Delta The amount of token0 that was sent (negative) or must be received (positive) by the pool by
  /// the end of the swap. If positive, the callback must send that amount of token0 to the pool.
  /// @param amount1Delta The amount of token1 that was sent (negative) or must be received (positive) by the pool by
  /// the end of the swap. If positive, the callback must send that amount of token1 to the pool.
  /// @param data Any data passed through by the caller via the IAlgebraPoolActions#swap call
  function algebraSwapCallback(
    int256 amount0Delta,
    int256 amount1Delta,
    bytes calldata data
  ) external;
}

// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.5.0;
pragma abicoder v2;

import '../libraries/AdaptiveFee.sol';

interface IDataStorageOperator {
  event FeeConfiguration(bool zto, AdaptiveFee.Configuration feeConfig);

  /**
   * @notice Returns data belonging to a certain timepoint
   * @param index The index of timepoint in the array
   * @dev There is more convenient function to fetch a timepoint: getTimepoints(). Which requires not an index but seconds
   * @return initialized Whether the timepoint has been initialized and the values are safe to use,
   * blockTimestamp The timestamp of the observation,
   * tickCumulative The tick multiplied by seconds elapsed for the life of the pool as of the timepoint timestamp,
   * secondsPerLiquidityCumulative The seconds per in range liquidity for the life of the pool as of the timepoint timestamp,
   * volatilityCumulative Cumulative standard deviation for the life of the pool as of the timepoint timestamp,
   * averageTick Time-weighted average tick,
   * volumePerLiquidityCumulative Cumulative swap volume per liquidity for the life of the pool as of the timepoint timestamp
   */
  function timepoints(uint256 index)
    external
    view
    returns (
      bool initialized,
      uint32 blockTimestamp,
      int56 tickCumulative,
      uint160 secondsPerLiquidityCumulative,
      uint88 volatilityCumulative,
      int24 averageTick,
      uint144 volumePerLiquidityCumulative
    );

  /// @notice Initialize the dataStorage array by writing the first slot. Called once for the lifecycle of the timepoints array
  /// @param time The time of the dataStorage initialization, via block.timestamp truncated to uint32
  /// @param tick Initial tick
  function initialize(uint32 time, int24 tick) external;

  /// @dev Reverts if an timepoint at or before the desired timepoint timestamp does not exist.
  /// 0 may be passed as `secondsAgo' to return the current cumulative values.
  /// If called with a timestamp falling between two timepoints, returns the counterfactual accumulator values
  /// at exactly the timestamp between the two timepoints.
  /// @param time The current block timestamp
  /// @param secondsAgo The amount of time to look back, in seconds, at which point to return an timepoint
  /// @param tick The current tick
  /// @param index The index of the timepoint that was most recently written to the timepoints array
  /// @param liquidity The current in-range pool liquidity
  /// @return tickCumulative The cumulative tick since the pool was first initialized, as of `secondsAgo`
  /// @return secondsPerLiquidityCumulative The cumulative seconds / max(1, liquidity) since the pool was first initialized, as of `secondsAgo`
  /// @return volatilityCumulative The cumulative volatility value since the pool was first initialized, as of `secondsAgo`
  /// @return volumePerAvgLiquidity The cumulative volume per liquidity value since the pool was first initialized, as of `secondsAgo`
  function getSingleTimepoint(
    uint32 time,
    uint32 secondsAgo,
    int24 tick,
    uint16 index,
    uint128 liquidity
  )
    external
    view
    returns (
      int56 tickCumulative,
      uint160 secondsPerLiquidityCumulative,
      uint112 volatilityCumulative,
      uint256 volumePerAvgLiquidity
    );

  /// @notice Returns the accumulator values as of each time seconds ago from the given time in the array of `secondsAgos`
  /// @dev Reverts if `secondsAgos` > oldest timepoint
  /// @param time The current block.timestamp
  /// @param secondsAgos Each amount of time to look back, in seconds, at which point to return an timepoint
  /// @param tick The current tick
  /// @param index The index of the timepoint that was most recently written to the timepoints array
  /// @param liquidity The current in-range pool liquidity
  /// @return tickCumulatives The cumulative tick since the pool was first initialized, as of each `secondsAgo`
  /// @return secondsPerLiquidityCumulatives The cumulative seconds / max(1, liquidity) since the pool was first initialized, as of each `secondsAgo`
  /// @return volatilityCumulatives The cumulative volatility values since the pool was first initialized, as of each `secondsAgo`
  /// @return volumePerAvgLiquiditys The cumulative volume per liquidity values since the pool was first initialized, as of each `secondsAgo`
  function getTimepoints(
    uint32 time,
    uint32[] memory secondsAgos,
    int24 tick,
    uint16 index,
    uint128 liquidity
  )
    external
    view
    returns (
      int56[] memory tickCumulatives,
      uint160[] memory secondsPerLiquidityCumulatives,
      uint112[] memory volatilityCumulatives,
      uint256[] memory volumePerAvgLiquiditys
    );

  /// @notice Returns average volatility in the range from time-WINDOW to time
  /// @param time The current block.timestamp
  /// @param tick The current tick
  /// @param index The index of the timepoint that was most recently written to the timepoints array
  /// @param liquidity The current in-range pool liquidity
  /// @return TWVolatilityAverage The average volatility in the recent range
  /// @return TWVolumePerLiqAverage The average volume per liquidity in the recent range
  function getAverages(
    uint32 time,
    int24 tick,
    uint16 index,
    uint128 liquidity
  ) external view returns (uint112 TWVolatilityAverage, uint256 TWVolumePerLiqAverage);

  /// @notice Writes an dataStorage timepoint to the array
  /// @dev Writable at most once per block. Index represents the most recently written element. index must be tracked externally.
  /// @param index The index of the timepoint that was most recently written to the timepoints array
  /// @param blockTimestamp The timestamp of the new timepoint
  /// @param tick The active tick at the time of the new timepoint
  /// @param liquidity The total in-range liquidity at the time of the new timepoint
  /// @param volumePerLiquidity The gmean(volumes)/liquidity at the time of the new timepoint
  /// @return indexUpdated The new index of the most recently written element in the dataStorage array
  function write(
    uint16 index,
    uint32 blockTimestamp,
    int24 tick,
    uint128 liquidity,
    uint128 volumePerLiquidity
  ) external returns (uint16 indexUpdated);

  /// @notice Changes fee configuration for the pool
  function changeFeeConfiguration(bool zto, AdaptiveFee.Configuration calldata feeConfig) external;

  /// @notice Calculates gmean(volume/liquidity) for block
  /// @param liquidity The current in-range pool liquidity
  /// @param amount0 Total amount of swapped token0
  /// @param amount1 Total amount of swapped token1
  /// @return volumePerLiquidity gmean(volume/liquidity) capped by 100000 << 64
  function calculateVolumePerLiquidity(
    uint128 liquidity,
    int256 amount0,
    int256 amount1
  ) external pure returns (uint128 volumePerLiquidity);

  /// @return windowLength Length of window used to calculate averages
  function window() external view returns (uint32 windowLength);

  /// @notice Calculates fee based on combination of sigmoids
  /// @param time The current block.timestamp
  /// @param tick The current tick
  /// @param index The index of the timepoint that was most recently written to the timepoints array
  /// @param liquidity The current in-range pool liquidity
  /// @return feeZto The fee for ZtO swaps in hundredths of a bip, i.e. 1e-6
  /// @return feeOtz The fee for OtZ swaps in hundredths of a bip, i.e. 1e-6
  function getFees(
    uint32 time,
    int24 tick,
    uint16 index,
    uint128 liquidity
  ) external view returns (uint16 feeZto, uint16 feeOtz);
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.7.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
 * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
 *
 * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
 * presenting a message signed by the account. By not relying on `{IERC20-approve}`, the token holder account doesn't
 * need to send a transaction, and thus is not required to hold Ether at all.
 */
interface IERC20Permit {
    /**
     * @dev Sets `value` as the allowance of `spender` over `owner`'s tokens,
     * given `owner`'s signed approval.
     *
     * IMPORTANT: The same issues {IERC20-approve} has related to transaction
     * ordering also apply here.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `deadline` must be a timestamp in the future.
     * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
     * over the EIP712-formatted function arguments.
     * - the signature must use ``owner``'s current nonce (see {nonces}).
     *
     * For more information on the signature format, see the
     * https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
     * section].
     */
    function permit(address owner, address spender, uint256 value, uint256 deadline, uint8 v, bytes32 r, bytes32 s) external;

    /**
     * @dev Returns the current nonce for `owner`. This value must be
     * included whenever a signature is generated for {permit}.
     *
     * Every successful call to {permit} increases ``owner``'s nonce by one. This
     * prevents a signature from being used multiple times.
     */
    function nonces(address owner) external view returns (uint256);

    /**
     * @dev Returns the domain separator used in the encoding of the signature for `permit`, as defined by {EIP712}.
     */
    // solhint-disable-next-line func-name-mixedcase
    function DOMAIN_SEPARATOR() external view returns (bytes32);
}

// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.5.0;

/// @title Interface for permit
/// @notice Interface used by DAI/CHAI for permit
interface IERC20PermitAllowed {
    /// @notice Approve the spender to spend some tokens via the holder signature
    /// @dev This is the permit interface used by DAI and CHAI
    /// @param holder The address of the token holder, the token owner
    /// @param spender The address of the token spender
    /// @param nonce The holder's nonce, increases at each call to permit
    /// @param expiry The timestamp at which the permit is no longer valid
    /// @param allowed Boolean that sets approval amount, true for type(uint256).max and false for 0
    /// @param v Must produce valid secp256k1 signature from the holder along with `r` and `s`
    /// @param r Must produce valid secp256k1 signature from the holder along with `v` and `s`
    /// @param s Must produce valid secp256k1 signature from the holder along with `r` and `v`
    function permit(
        address holder,
        address spender,
        uint256 nonce,
        uint256 expiry,
        bool allowed,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external;
}

// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.7.5;
pragma abicoder v2;

/// @title Multicall interface
/// @notice Enables calling multiple methods in a single call to the contract
interface IMulticall {
    /// @notice Call multiple functions in the current contract and return the data from all of them if they all succeed
    /// @dev The `msg.value` should not be trusted for any method callable from multicall.
    /// @param data The encoded function data for each of the calls to make to this contract
    /// @return results The results from each of the calls passed in via data
    function multicall(bytes[] calldata data) external payable returns (bytes[] memory results);
}

// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.5.0;

/// @title Immutable state
/// @notice Functions that return immutable state of the router
/// @dev Credit to Uniswap Labs under GPL-2.0-or-later license:
/// https://github.com/Uniswap/v3-periphery
interface IPeripheryImmutableState {
    /// @return Returns the address of the Algebra factory
    function factory() external view returns (address);

    /// @return Returns the address of the pool Deployer
    function poolDeployer() external view returns (address);

    /// @return Returns the address of WNativeToken
    function WNativeToken() external view returns (address);
}

// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.7.5;

/// @title Periphery Payments
/// @notice Functions to ease deposits and withdrawals of NativeToken
/// @dev Credit to Uniswap Labs under GPL-2.0-or-later license:
/// https://github.com/Uniswap/v3-periphery
interface IPeripheryPayments {
    /// @notice Unwraps the contract's WNativeToken balance and sends it to recipient as NativeToken.
    /// @dev The amountMinimum parameter prevents malicious contracts from stealing WNativeToken from users.
    /// @param amountMinimum The minimum amount of WNativeToken to unwrap
    /// @param recipient The address receiving NativeToken
    function unwrapWNativeToken(uint256 amountMinimum, address recipient) external payable;

    /// @notice Refunds any NativeToken balance held by this contract to the `msg.sender`
    /// @dev Useful for bundling with mint or increase liquidity that uses ether, or exact output swaps
    /// that use ether for the input amount
    function refundNativeToken() external payable;

    /// @notice Transfers the full amount of a token held by this contract to recipient
    /// @dev The amountMinimum parameter prevents malicious contracts from stealing the token from users
    /// @param token The contract address of the token which will be transferred to `recipient`
    /// @param amountMinimum The minimum amount of token required for a transfer
    /// @param recipient The destination address of the token
    function sweepToken(
        address token,
        uint256 amountMinimum,
        address recipient
    ) external payable;
}

// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.7.5;

import './IPeripheryPayments.sol';

/// @title Periphery Payments
/// @notice Functions to ease deposits and withdrawals of NativeToken
/// @dev Credit to Uniswap Labs under GPL-2.0-or-later license:
/// https://github.com/Uniswap/v3-periphery
interface IPeripheryPaymentsWithFee is IPeripheryPayments {
    /// @notice Unwraps the contract's WNativeToken balance and sends it to recipient as NativeToken, with a percentage between
    /// 0 (exclusive), and 1 (inclusive) going to feeRecipient
    /// @dev The amountMinimum parameter prevents malicious contracts from stealing WNativeToken from users.
    function unwrapWNativeTokenWithFee(
        uint256 amountMinimum,
        address recipient,
        uint256 feeBips,
        address feeRecipient
    ) external payable;

    /// @notice Transfers the full amount of a token held by this contract to recipient, with a percentage between
    /// 0 (exclusive) and 1 (inclusive) going to feeRecipient
    /// @dev The amountMinimum parameter prevents malicious contracts from stealing the token from users
    function sweepTokenWithFee(
        address token,
        uint256 amountMinimum,
        address recipient,
        uint256 feeBips,
        address feeRecipient
    ) external payable;
}

// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.7.5;

/// @title Self Permit
/// @notice Functionality to call permit on any EIP-2612-compliant token for use in the route
interface ISelfPermit {
    /// @notice Permits this contract to spend a given token from `msg.sender`
    /// @dev The `owner` is always msg.sender and the `spender` is always address(this).
    /// @param token The address of the token spent
    /// @param value The amount that can be spent of token
    /// @param deadline A timestamp, the current blocktime must be less than or equal to this timestamp
    /// @param v Must produce valid secp256k1 signature from the holder along with `r` and `s`
    /// @param r Must produce valid secp256k1 signature from the holder along with `v` and `s`
    /// @param s Must produce valid secp256k1 signature from the holder along with `r` and `v`
    function selfPermit(
        address token,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external payable;

    /// @notice Permits this contract to spend a given token from `msg.sender`
    /// @dev The `owner` is always msg.sender and the `spender` is always address(this).
    /// Can be used instead of #selfPermit to prevent calls from failing due to a frontrun of a call to #selfPermit
    /// @param token The address of the token spent
    /// @param value The amount that can be spent of token
    /// @param deadline A timestamp, the current blocktime must be less than or equal to this timestamp
    /// @param v Must produce valid secp256k1 signature from the holder along with `r` and `s`
    /// @param r Must produce valid secp256k1 signature from the holder along with `v` and `s`
    /// @param s Must produce valid secp256k1 signature from the holder along with `r` and `v`
    function selfPermitIfNecessary(
        address token,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external payable;

    /// @notice Permits this contract to spend the sender's tokens for permit signatures that have the `allowed` parameter
    /// @dev The `owner` is always msg.sender and the `spender` is always address(this)
    /// @param token The address of the token spent
    /// @param nonce The current nonce of the owner
    /// @param expiry The timestamp at which the permit is no longer valid
    /// @param v Must produce valid secp256k1 signature from the holder along with `r` and `s`
    /// @param r Must produce valid secp256k1 signature from the holder along with `v` and `s`
    /// @param s Must produce valid secp256k1 signature from the holder along with `r` and `v`
    function selfPermitAllowed(
        address token,
        uint256 nonce,
        uint256 expiry,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external payable;

    /// @notice Permits this contract to spend the sender's tokens for permit signatures that have the `allowed` parameter
    /// @dev The `owner` is always msg.sender and the `spender` is always address(this)
    /// Can be used instead of #selfPermitAllowed to prevent calls from failing due to a frontrun of a call to #selfPermitAllowed.
    /// @param token The address of the token spent
    /// @param nonce The current nonce of the owner
    /// @param expiry The timestamp at which the permit is no longer valid
    /// @param v Must produce valid secp256k1 signature from the holder along with `r` and `s`
    /// @param r Must produce valid secp256k1 signature from the holder along with `v` and `s`
    /// @param s Must produce valid secp256k1 signature from the holder along with `r` and `v`
    function selfPermitAllowedIfNecessary(
        address token,
        uint256 nonce,
        uint256 expiry,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external payable;
}

// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.7.5;
pragma abicoder v2;

import '@cryptoalgebra/core/contracts/interfaces/callback/IAlgebraSwapCallback.sol';

/// @title Router token swapping functionality
/// @notice Functions for swapping tokens via Algebra
/// @dev Credit to Uniswap Labs under GPL-2.0-or-later license:
/// https://github.com/Uniswap/v3-periphery
interface ISwapRouter is IAlgebraSwapCallback {
    struct ExactInputSingleParams {
        address tokenIn;
        address tokenOut;
        address recipient;
        uint256 deadline;
        uint256 amountIn;
        uint256 amountOutMinimum;
        uint160 limitSqrtPrice;
    }

    /// @notice Swaps `amountIn` of one token for as much as possible of another token
    /// @param params The parameters necessary for the swap, encoded as `ExactInputSingleParams` in calldata
    /// @return amountOut The amount of the received token
    function exactInputSingle(ExactInputSingleParams calldata params) external payable returns (uint256 amountOut);

    struct ExactInputParams {
        bytes path;
        address recipient;
        uint256 deadline;
        uint256 amountIn;
        uint256 amountOutMinimum;
    }

    /// @notice Swaps `amountIn` of one token for as much as possible of another along the specified path
    /// @param params The parameters necessary for the multi-hop swap, encoded as `ExactInputParams` in calldata
    /// @return amountOut The amount of the received token
    function exactInput(ExactInputParams calldata params) external payable returns (uint256 amountOut);

    struct ExactOutputSingleParams {
        address tokenIn;
        address tokenOut;
        uint24 fee;
        address recipient;
        uint256 deadline;
        uint256 amountOut;
        uint256 amountInMaximum;
        uint160 limitSqrtPrice;
    }

    /// @notice Swaps as little as possible of one token for `amountOut` of another token
    /// @param params The parameters necessary for the swap, encoded as `ExactOutputSingleParams` in calldata
    /// @return amountIn The amount of the input token
    function exactOutputSingle(ExactOutputSingleParams calldata params) external payable returns (uint256 amountIn);

    struct ExactOutputParams {
        bytes path;
        address recipient;
        uint256 deadline;
        uint256 amountOut;
        uint256 amountInMaximum;
    }

    /// @notice Swaps as little as possible of one token for `amountOut` of another along the specified path (reversed)
    /// @param params The parameters necessary for the multi-hop swap, encoded as `ExactOutputParams` in calldata
    /// @return amountIn The amount of the input token
    function exactOutput(ExactOutputParams calldata params) external payable returns (uint256 amountIn);

    /// @notice Swaps `amountIn` of one token for as much as possible of another along the specified path
    /// @dev Unlike standard swaps, handles transferring from user before the actual swap.
    /// @param params The parameters necessary for the multi-hop swap, encoded as `ExactInputParams` in calldata
    /// @return amountOut The amount of the received token
    function exactInputSingleSupportingFeeOnTransferTokens(ExactInputSingleParams calldata params)
        external
        returns (uint256 amountOut);
}

// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity =0.7.6;

import '@openzeppelin/contracts/token/ERC20/IERC20.sol';

/// @title Interface for WNativeToken
interface IWNativeToken is IERC20 {
    /// @notice Deposit ether to get wrapped ether
    function deposit() external payable;

    /// @notice Withdraw wrapped ether to get ether
    function withdraw(uint256) external;
}

// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.7.0;

/// @title Optimized overflow and underflow safe math operations
/// @notice Contains methods for doing math operations that revert on overflow or underflow for minimal gas cost
/// @dev Credit to Uniswap Labs under GPL-2.0-or-later license:
/// https://github.com/Uniswap/v3-core/blob/main/contracts/libraries
library LowGasSafeMath {
  /// @notice Returns x + y, reverts if sum overflows uint256
  /// @param x The augend
  /// @param y The addend
  /// @return z The sum of x and y
  function add(uint256 x, uint256 y) internal pure returns (uint256 z) {
    require((z = x + y) >= x);
  }

  /// @notice Returns x - y, reverts if underflows
  /// @param x The minuend
  /// @param y The subtrahend
  /// @return z The difference of x and y
  function sub(uint256 x, uint256 y) internal pure returns (uint256 z) {
    require((z = x - y) <= x);
  }

  /// @notice Returns x * y, reverts if overflows
  /// @param x The multiplicand
  /// @param y The multiplier
  /// @return z The product of x and y
  function mul(uint256 x, uint256 y) internal pure returns (uint256 z) {
    require(x == 0 || (z = x * y) / x == y);
  }

  /// @notice Returns x + y, reverts if overflows or underflows
  /// @param x The augend
  /// @param y The addend
  /// @return z The sum of x and y
  function add(int256 x, int256 y) internal pure returns (int256 z) {
    require((z = x + y) >= x == (y >= 0));
  }

  /// @notice Returns x - y, reverts if overflows or underflows
  /// @param x The minuend
  /// @param y The subtrahend
  /// @return z The difference of x and y
  function sub(int256 x, int256 y) internal pure returns (int256 z) {
    require((z = x - y) <= x == (y >= 0));
  }

  /// @notice Returns x + y, reverts if overflows or underflows
  /// @param x The augend
  /// @param y The addend
  /// @return z The sum of x and y
  function add128(uint128 x, uint128 y) internal pure returns (uint128 z) {
    require((z = x + y) >= x);
  }
}

// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity =0.7.6;
pragma abicoder v2;

import '../interfaces/IMulticall.sol';

/// @title Multicall
/// @notice Enables calling multiple methods in a single call to the contract
abstract contract Multicall is IMulticall {
    /// @inheritdoc IMulticall
    function multicall(bytes[] calldata data) external payable override returns (bytes[] memory results) {
        results = new bytes[](data.length);
        for (uint256 i = 0; i < data.length; i++) {
            (bool success, bytes memory result) = address(this).delegatecall(data[i]);

            if (!success) {
                // Next 5 lines from https://ethereum.stackexchange.com/a/83577
                if (result.length < 68) revert();
                assembly {
                    result := add(result, 0x04)
                }
                revert(abi.decode(result, (string)));
            }

            results[i] = result;
        }
    }
}

// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.6.0;

import './BytesLib.sol';

/// @title Functions for manipulating path data for multihop swaps
/// @dev Credit to Uniswap Labs under GPL-2.0-or-later license:
/// https://github.com/Uniswap/v3-periphery
library Path {
    using BytesLib for bytes;

    /// @dev The length of the bytes encoded address
    uint256 private constant ADDR_SIZE = 20;
    /// @dev The length of the bytes encoded fee
    uint256 private constant FEE_SIZE = 3;

    /// @dev The offset of a single token address and pool fee
    uint256 private constant NEXT_OFFSET = ADDR_SIZE;
    /// @dev The offset of an encoded pool key
    uint256 private constant POP_OFFSET = NEXT_OFFSET + ADDR_SIZE;
    /// @dev The minimum length of an encoding that contains 2 or more pools
    uint256 private constant MULTIPLE_POOLS_MIN_LENGTH = POP_OFFSET + NEXT_OFFSET;

    /// @notice Returns true iff the path contains two or more pools
    /// @param path The encoded swap path
    /// @return True if path contains two or more pools, otherwise false
    function hasMultiplePools(bytes memory path) internal pure returns (bool) {
        return path.length >= MULTIPLE_POOLS_MIN_LENGTH;
    }

    /// @notice Returns the number of pools in the path
    /// @param path The encoded swap path
    /// @return The number of pools in the path
    function numPools(bytes memory path) internal pure returns (uint256) {
        // Ignore the first token address. From then on every fee and token offset indicates a pool.
        return ((path.length - ADDR_SIZE) / NEXT_OFFSET);
    }

    /// @notice Decodes the first pool in path
    /// @param path The bytes encoded swap path
    /// @return tokenA The first token of the given pool
    /// @return tokenB The second token of the given pool
    function decodeFirstPool(bytes memory path) internal pure returns (address tokenA, address tokenB) {
        tokenA = path.toAddress(0);
        tokenB = path.toAddress(NEXT_OFFSET);
    }

    /// @notice Gets the segment corresponding to the first pool in the path
    /// @param path The bytes encoded swap path
    /// @return The segment containing all data necessary to target the first pool in the path
    function getFirstPool(bytes memory path) internal pure returns (bytes memory) {
        return path.slice(0, POP_OFFSET);
    }

    /// @notice Skips a token + fee element from the buffer and returns the remainder
    /// @param path The swap path
    /// @return The remaining token + fee elements in the path
    function skipToken(bytes memory path) internal pure returns (bytes memory) {
        return path.slice(NEXT_OFFSET, path.length - NEXT_OFFSET);
    }
}

// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity =0.7.6;

import '../interfaces/IPeripheryImmutableState.sol';

/// @title Immutable state
/// @notice Immutable state used by periphery contracts
/// @dev Credit to Uniswap Labs under GPL-2.0-or-later license:
/// https://github.com/Uniswap/v3-periphery
abstract contract PeripheryImmutableState is IPeripheryImmutableState {
    /// @inheritdoc IPeripheryImmutableState
    address public immutable override factory;
    /// @inheritdoc IPeripheryImmutableState
    address public immutable override poolDeployer;
    /// @inheritdoc IPeripheryImmutableState
    address public immutable override WNativeToken;

    constructor(
        address _factory,
        address _WNativeToken,
        address _poolDeployer
    ) {
        factory = _factory;
        poolDeployer = _poolDeployer;
        WNativeToken = _WNativeToken;
    }
}

// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.7.5;

import '@openzeppelin/contracts/token/ERC20/IERC20.sol';

import '../interfaces/IPeripheryPayments.sol';
import '../interfaces/external/IWNativeToken.sol';

import '../libraries/TransferHelper.sol';

import './PeripheryImmutableState.sol';

/// @dev Credit to Uniswap Labs under GPL-2.0-or-later license:
/// https://github.com/Uniswap/v3-periphery
abstract contract PeripheryPayments is IPeripheryPayments, PeripheryImmutableState {
    receive() external payable {
        require(msg.sender == WNativeToken, 'Not WNativeToken');
    }

    /// @inheritdoc IPeripheryPayments
    function unwrapWNativeToken(uint256 amountMinimum, address recipient) external payable override {
        uint256 balanceWNativeToken = IWNativeToken(WNativeToken).balanceOf(address(this));
        require(balanceWNativeToken >= amountMinimum, 'Insufficient WNativeToken');

        if (balanceWNativeToken > 0) {
            IWNativeToken(WNativeToken).withdraw(balanceWNativeToken);
            TransferHelper.safeTransferNative(recipient, balanceWNativeToken);
        }
    }

    /// @inheritdoc IPeripheryPayments
    function sweepToken(
        address token,
        uint256 amountMinimum,
        address recipient
    ) external payable override {
        uint256 balanceToken = IERC20(token).balanceOf(address(this));
        require(balanceToken >= amountMinimum, 'Insufficient token');

        if (balanceToken > 0) {
            TransferHelper.safeTransfer(token, recipient, balanceToken);
        }
    }

    /// @inheritdoc IPeripheryPayments
    function refundNativeToken() external payable override {
        if (address(this).balance > 0) TransferHelper.safeTransferNative(msg.sender, address(this).balance);
    }

    /// @param token The token to pay
    /// @param payer The entity that must pay
    /// @param recipient The entity that will receive payment
    /// @param value The amount to pay
    function pay(
        address token,
        address payer,
        address recipient,
        uint256 value
    ) internal {
        if (token == WNativeToken && address(this).balance >= value) {
            // pay with WNativeToken
            IWNativeToken(WNativeToken).deposit{value: value}(); // wrap only what is needed to pay
            IWNativeToken(WNativeToken).transfer(recipient, value);
        } else if (payer == address(this)) {
            // pay with tokens already in the contract (for the exact input multihop case)
            TransferHelper.safeTransfer(token, recipient, value);
        } else {
            // pull payment
            TransferHelper.safeTransferFrom(token, payer, recipient, value);
        }
    }
}

// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.7.5;

import '@openzeppelin/contracts/token/ERC20/IERC20.sol';
import '@cryptoalgebra/core/contracts/libraries/LowGasSafeMath.sol';

import './PeripheryPayments.sol';
import '../interfaces/IPeripheryPaymentsWithFee.sol';

import '../interfaces/external/IWNativeToken.sol';
import '../libraries/TransferHelper.sol';

/// @dev Credit to Uniswap Labs under GPL-2.0-or-later license:
/// https://github.com/Uniswap/v3-periphery
abstract contract PeripheryPaymentsWithFee is PeripheryPayments, IPeripheryPaymentsWithFee {
    using LowGasSafeMath for uint256;

    /// @inheritdoc IPeripheryPaymentsWithFee
    function unwrapWNativeTokenWithFee(
        uint256 amountMinimum,
        address recipient,
        uint256 feeBips,
        address feeRecipient
    ) public payable override {
        require(feeBips > 0 && feeBips <= 100);

        uint256 balanceWNativeToken = IWNativeToken(WNativeToken).balanceOf(address(this));
        require(balanceWNativeToken >= amountMinimum, 'Insufficient WNativeToken');

        if (balanceWNativeToken > 0) {
            IWNativeToken(WNativeToken).withdraw(balanceWNativeToken);
            uint256 feeAmount = balanceWNativeToken.mul(feeBips) / 10_000;
            if (feeAmount > 0) TransferHelper.safeTransferNative(feeRecipient, feeAmount);
            TransferHelper.safeTransferNative(recipient, balanceWNativeToken - feeAmount);
        }
    }

    /// @inheritdoc IPeripheryPaymentsWithFee
    function sweepTokenWithFee(
        address token,
        uint256 amountMinimum,
        address recipient,
        uint256 feeBips,
        address feeRecipient
    ) public payable override {
        require(feeBips > 0 && feeBips <= 100);

        uint256 balanceToken = IERC20(token).balanceOf(address(this));
        require(balanceToken >= amountMinimum, 'Insufficient token');

        if (balanceToken > 0) {
            uint256 feeAmount = balanceToken.mul(feeBips) / 10_000;
            if (feeAmount > 0) TransferHelper.safeTransfer(token, feeRecipient, feeAmount);
            TransferHelper.safeTransfer(token, recipient, balanceToken - feeAmount);
        }
    }
}

// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity =0.7.6;

import './BlockTimestamp.sol';

/// @dev Credit to Uniswap Labs under GPL-2.0-or-later license:
/// https://github.com/Uniswap/v3-periphery
abstract contract PeripheryValidation is BlockTimestamp {
    modifier checkDeadline(uint256 deadline) {
        require(_blockTimestamp() <= deadline, 'Transaction too old');
        _;
    }
}

// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.5.0;

/// @title Provides functions for deriving a pool address from the factory, tokens, and the fee
/// @dev Credit to Uniswap Labs under GPL-2.0-or-later license:
/// https://github.com/Uniswap/v3-periphery
library PoolAddress {
    bytes32 internal constant POOL_INIT_CODE_HASH = 0x6c1bebd370ba84753516bc1393c0d0a6c645856da55f5393ac8ab3d6dbc861d3;

    /// @notice The identifying key of the pool
    struct PoolKey {
        address token0;
        address token1;
    }

    /// @notice Returns PoolKey: the ordered tokens with the matched fee levels
    /// @param tokenA The first token of a pool, unsorted
    /// @param tokenB The second token of a pool, unsorted
    /// @return Poolkey The pool details with ordered token0 and token1 assignments
    function getPoolKey(address tokenA, address tokenB) internal pure returns (PoolKey memory) {
        if (tokenA > tokenB) (tokenA, tokenB) = (tokenB, tokenA);
        return PoolKey({token0: tokenA, token1: tokenB});
    }

    /// @notice Deterministically computes the pool address given the factory and PoolKey
    /// @param factory The Algebra factory contract address
    /// @param key The PoolKey
    /// @return pool The contract address of the V3 pool
    function computeAddress(address factory, PoolKey memory key) internal pure returns (address pool) {
        require(key.token0 < key.token1);
        pool = address(
            uint256(
                keccak256(
                    abi.encodePacked(
                        hex'ff',
                        factory,
                        keccak256(abi.encode(key.token0, key.token1)),
                        POOL_INIT_CODE_HASH
                    )
                )
            )
        );
    }
}

// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.5.0;

/// @title Safe casting methods
/// @notice Contains methods for safely casting between types
/// @dev Credit to Uniswap Labs under GPL-2.0-or-later license:
/// https://github.com/Uniswap/v3-core/blob/main/contracts/libraries
library SafeCast {
  /// @notice Cast a uint256 to a uint160, revert on overflow
  /// @param y The uint256 to be downcasted
  /// @return z The downcasted integer, now type uint160
  function toUint160(uint256 y) internal pure returns (uint160 z) {
    require((z = uint160(y)) == y);
  }

  /// @notice Cast a int256 to a int128, revert on overflow or underflow
  /// @param y The int256 to be downcasted
  /// @return z The downcasted integer, now type int128
  function toInt128(int256 y) internal pure returns (int128 z) {
    require((z = int128(y)) == y);
  }

  /// @notice Cast a uint256 to a int256, revert on overflow
  /// @param y The uint256 to be casted
  /// @return z The casted integer, now type int256
  function toInt256(uint256 y) internal pure returns (int256 z) {
    require(y < 2**255);
    z = int256(y);
  }
}

// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.5.0;

import '@openzeppelin/contracts/token/ERC20/IERC20.sol';
import '@openzeppelin/contracts/drafts/IERC20Permit.sol';

import '../interfaces/ISelfPermit.sol';
import '../interfaces/external/IERC20PermitAllowed.sol';

/// @title Self Permit
/// @notice Functionality to call permit on any EIP-2612-compliant token for use in the route
/// @dev These functions are expected to be embedded in multicalls to allow EOAs to approve a contract and call a function
/// that requires an approval in a single transaction.
abstract contract SelfPermit is ISelfPermit {
    /// @inheritdoc ISelfPermit
    function selfPermit(
        address token,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) public payable override {
        IERC20Permit(token).permit(msg.sender, address(this), value, deadline, v, r, s);
    }

    /// @inheritdoc ISelfPermit
    function selfPermitIfNecessary(
        address token,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external payable override {
        if (IERC20(token).allowance(msg.sender, address(this)) < value) selfPermit(token, value, deadline, v, r, s);
    }

    /// @inheritdoc ISelfPermit
    function selfPermitAllowed(
        address token,
        uint256 nonce,
        uint256 expiry,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) public payable override {
        IERC20PermitAllowed(token).permit(msg.sender, address(this), nonce, expiry, true, v, r, s);
    }

    /// @inheritdoc ISelfPermit
    function selfPermitAllowedIfNecessary(
        address token,
        uint256 nonce,
        uint256 expiry,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external payable override {
        if (IERC20(token).allowance(msg.sender, address(this)) < type(uint256).max)
            selfPermitAllowed(token, nonce, expiry, v, r, s);
    }
}

// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity =0.7.6;
pragma abicoder v2;

import '@cryptoalgebra/core/contracts/libraries/SafeCast.sol';
import '@cryptoalgebra/core/contracts/libraries/TickMath.sol';
import '@cryptoalgebra/core/contracts/interfaces/IAlgebraPool.sol';

import './interfaces/ISwapRouter.sol';
import './base/PeripheryImmutableState.sol';
import './base/PeripheryValidation.sol';
import './base/PeripheryPaymentsWithFee.sol';
import './base/Multicall.sol';
import './base/SelfPermit.sol';
import './libraries/Path.sol';
import './libraries/PoolAddress.sol';
import './libraries/CallbackValidation.sol';
import './interfaces/external/IWNativeToken.sol';

/// @title Algebra Swap Router
/// @notice Router for stateless execution of swaps against Algebra
/// @dev Credit to Uniswap Labs under GPL-2.0-or-later license:
/// https://github.com/Uniswap/v3-periphery
contract SwapRouter is
    ISwapRouter,
    PeripheryImmutableState,
    PeripheryValidation,
    PeripheryPaymentsWithFee,
    Multicall,
    SelfPermit
{
    using Path for bytes;
    using SafeCast for uint256;

    /// @dev Used as the placeholder value for amountInCached, because the computed amount in for an exact output swap
    /// can never actually be this value
    uint256 private constant DEFAULT_AMOUNT_IN_CACHED = type(uint256).max;

    /// @dev Transient storage variable used for returning the computed amount in for an exact output swap.
    uint256 private amountInCached = DEFAULT_AMOUNT_IN_CACHED;

    constructor(
        address _factory,
        address _WNativeToken,
        address _poolDeployer
    ) PeripheryImmutableState(_factory, _WNativeToken, _poolDeployer) {}

    /// @dev Returns the pool for the given token pair and fee. The pool contract may or may not exist.
    function getPool(address tokenA, address tokenB) private view returns (IAlgebraPool) {
        return IAlgebraPool(PoolAddress.computeAddress(poolDeployer, PoolAddress.getPoolKey(tokenA, tokenB)));
    }

    struct SwapCallbackData {
        bytes path;
        address payer;
    }

    /// @inheritdoc IAlgebraSwapCallback
    function algebraSwapCallback(
        int256 amount0Delta,
        int256 amount1Delta,
        bytes calldata _data
    ) external override {
        require(amount0Delta > 0 || amount1Delta > 0); // swaps entirely within 0-liquidity regions are not supported
        SwapCallbackData memory data = abi.decode(_data, (SwapCallbackData));
        (address tokenIn, address tokenOut) = data.path.decodeFirstPool();
        CallbackValidation.verifyCallback(poolDeployer, tokenIn, tokenOut);

        (bool isExactInput, uint256 amountToPay) = amount0Delta > 0
            ? (tokenIn < tokenOut, uint256(amount0Delta))
            : (tokenOut < tokenIn, uint256(amount1Delta));
        if (isExactInput) {
            pay(tokenIn, data.payer, msg.sender, amountToPay);
        } else {
            // either initiate the next swap or pay
            if (data.path.hasMultiplePools()) {
                data.path = data.path.skipToken();
                exactOutputInternal(amountToPay, msg.sender, 0, data);
            } else {
                amountInCached = amountToPay;
                tokenIn = tokenOut; // swap in/out because exact output swaps are reversed
                pay(tokenIn, data.payer, msg.sender, amountToPay);
            }
        }
    }

    /// @dev Performs a single exact input swap
    function exactInputInternal(
        uint256 amountIn,
        address recipient,
        uint160 limitSqrtPrice,
        SwapCallbackData memory data
    ) private returns (uint256 amountOut) {
        if (recipient == address(0)) recipient = address(this); // allow swapping to the router address with address 0

        (address tokenIn, address tokenOut) = data.path.decodeFirstPool();

        bool zeroToOne = tokenIn < tokenOut;

        (int256 amount0, int256 amount1) = getPool(tokenIn, tokenOut).swap(
            recipient,
            zeroToOne,
            amountIn.toInt256(),
            limitSqrtPrice == 0
                ? (zeroToOne ? TickMath.MIN_SQRT_RATIO + 1 : TickMath.MAX_SQRT_RATIO - 1)
                : limitSqrtPrice,
            abi.encode(data)
        );

        return uint256(-(zeroToOne ? amount1 : amount0));
    }

    /// @inheritdoc ISwapRouter
    function exactInputSingle(ExactInputSingleParams calldata params)
        external
        payable
        override
        checkDeadline(params.deadline)
        returns (uint256 amountOut)
    {
        amountOut = exactInputInternal(
            params.amountIn,
            params.recipient,
            params.limitSqrtPrice,
            SwapCallbackData({path: abi.encodePacked(params.tokenIn, params.tokenOut), payer: msg.sender})
        );
        require(amountOut >= params.amountOutMinimum, 'Too little received');
    }

    /// @inheritdoc ISwapRouter
    function exactInput(ExactInputParams memory params)
        external
        payable
        override
        checkDeadline(params.deadline)
        returns (uint256 amountOut)
    {
        address payer = msg.sender; // msg.sender pays for the first hop

        while (true) {
            bool hasMultiplePools = params.path.hasMultiplePools();

            // the outputs of prior swaps become the inputs to subsequent ones
            params.amountIn = exactInputInternal(
                params.amountIn,
                hasMultiplePools ? address(this) : params.recipient, // for intermediate swaps, this contract custodies
                0,
                SwapCallbackData({
                    path: params.path.getFirstPool(), // only the first pool in the path is necessary
                    payer: payer
                })
            );

            // decide whether to continue or terminate
            if (hasMultiplePools) {
                payer = address(this); // at this point, the caller has paid
                params.path = params.path.skipToken();
            } else {
                amountOut = params.amountIn;
                break;
            }
        }

        require(amountOut >= params.amountOutMinimum, 'Too little received');
    }

    /// @inheritdoc ISwapRouter
    function exactInputSingleSupportingFeeOnTransferTokens(ExactInputSingleParams calldata params)
        external
        override
        checkDeadline(params.deadline)
        returns (uint256 amountOut)
    {
        SwapCallbackData memory data = SwapCallbackData({
            path: abi.encodePacked(params.tokenIn, params.tokenOut),
            payer: msg.sender
        });
        address recipient = params.recipient == address(0) ? address(this) : params.recipient;

        bool zeroToOne = params.tokenIn < params.tokenOut;

        (int256 amount0, int256 amount1) = getPool(params.tokenIn, params.tokenOut).swapSupportingFeeOnInputTokens(
            msg.sender,
            recipient,
            zeroToOne,
            params.amountIn.toInt256(),
            params.limitSqrtPrice == 0
                ? (zeroToOne ? TickMath.MIN_SQRT_RATIO + 1 : TickMath.MAX_SQRT_RATIO - 1)
                : params.limitSqrtPrice,
            abi.encode(data)
        );

        amountOut = uint256(-(zeroToOne ? amount1 : amount0));

        require(amountOut >= params.amountOutMinimum, 'Too little received');
    }

    /// @dev Performs a single exact output swap
    function exactOutputInternal(
        uint256 amountOut,
        address recipient,
        uint160 limitSqrtPrice,
        SwapCallbackData memory data
    ) private returns (uint256 amountIn) {
        if (recipient == address(0)) recipient = address(this); // allow swapping to the router address with address 0

        (address tokenOut, address tokenIn) = data.path.decodeFirstPool();

        bool zeroToOne = tokenIn < tokenOut;

        (int256 amount0Delta, int256 amount1Delta) = getPool(tokenIn, tokenOut).swap(
            recipient,
            zeroToOne,
            -amountOut.toInt256(),
            limitSqrtPrice == 0
                ? (zeroToOne ? TickMath.MIN_SQRT_RATIO + 1 : TickMath.MAX_SQRT_RATIO - 1)
                : limitSqrtPrice,
            abi.encode(data)
        );

        uint256 amountOutReceived;
        (amountIn, amountOutReceived) = zeroToOne
            ? (uint256(amount0Delta), uint256(-amount1Delta))
            : (uint256(amount1Delta), uint256(-amount0Delta));
        // it's technically possible to not receive the full output amount,
        // so if no price limit has been specified, require this possibility away
        if (limitSqrtPrice == 0) require(amountOutReceived == amountOut);
    }

    /// @inheritdoc ISwapRouter
    function exactOutputSingle(ExactOutputSingleParams calldata params)
        external
        payable
        override
        checkDeadline(params.deadline)
        returns (uint256 amountIn)
    {
        // avoid an SLOAD by using the swap return data
        amountIn = exactOutputInternal(
            params.amountOut,
            params.recipient,
            params.limitSqrtPrice,
            SwapCallbackData({path: abi.encodePacked(params.tokenOut, params.tokenIn), payer: msg.sender})
        );

        require(amountIn <= params.amountInMaximum, 'Too much requested');
        amountInCached = DEFAULT_AMOUNT_IN_CACHED; // has to be reset even though we don't use it in the single hop case
    }

    /// @inheritdoc ISwapRouter
    function exactOutput(ExactOutputParams calldata params)
        external
        payable
        override
        checkDeadline(params.deadline)
        returns (uint256 amountIn)
    {
        // it's okay that the payer is fixed to msg.sender here, as they're only paying for the "final" exact output
        // swap, which happens first, and subsequent swaps are paid for within nested callback frames
        exactOutputInternal(
            params.amountOut,
            params.recipient,
            0,
            SwapCallbackData({path: params.path, payer: msg.sender})
        );

        amountIn = amountInCached;
        require(amountIn <= params.amountInMaximum, 'Too much requested');
        amountInCached = DEFAULT_AMOUNT_IN_CACHED;
    }
}

// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.5.0;

/// @title Math library for computing sqrt prices from ticks and vice versa
/// @notice Computes sqrt price for ticks of size 1.0001, i.e. sqrt(1.0001^tick) as fixed point Q64.96 numbers. Supports
/// prices between 2**-128 and 2**128
/// @dev Credit to Uniswap Labs under GPL-2.0-or-later license:
/// https://github.com/Uniswap/v3-core/blob/main/contracts/libraries
library TickMath {
  /// @dev The minimum tick that may be passed to #getSqrtRatioAtTick computed from log base 1.0001 of 2**-128
  int24 internal constant MIN_TICK = -887272;
  /// @dev The maximum tick that may be passed to #getSqrtRatioAtTick computed from log base 1.0001 of 2**128
  int24 internal constant MAX_TICK = -MIN_TICK;

  /// @dev The minimum value that can be returned from #getSqrtRatioAtTick. Equivalent to getSqrtRatioAtTick(MIN_TICK)
  uint160 internal constant MIN_SQRT_RATIO = 4295128739;
  /// @dev The maximum value that can be returned from #getSqrtRatioAtTick. Equivalent to getSqrtRatioAtTick(MAX_TICK)
  uint160 internal constant MAX_SQRT_RATIO = 1461446703485210103287273052203988822378723970342;

  /// @notice Calculates sqrt(1.0001^tick) * 2^96
  /// @dev Throws if |tick| > max tick
  /// @param tick The input tick for the above formula
  /// @return price A Fixed point Q64.96 number representing the sqrt of the ratio of the two assets (token1/token0)
  /// at the given tick
  function getSqrtRatioAtTick(int24 tick) internal pure returns (uint160 price) {
    // get abs value
    int24 mask = tick >> (24 - 1);
    uint256 absTick = uint256((tick ^ mask) - mask);
    require(absTick <= uint256(MAX_TICK), 'T');

    uint256 ratio = absTick & 0x1 != 0 ? 0xfffcb933bd6fad37aa2d162d1a594001 : 0x100000000000000000000000000000000;
    if (absTick & 0x2 != 0) ratio = (ratio * 0xfff97272373d413259a46990580e213a) >> 128;
    if (absTick & 0x4 != 0) ratio = (ratio * 0xfff2e50f5f656932ef12357cf3c7fdcc) >> 128;
    if (absTick & 0x8 != 0) ratio = (ratio * 0xffe5caca7e10e4e61c3624eaa0941cd0) >> 128;
    if (absTick & 0x10 != 0) ratio = (ratio * 0xffcb9843d60f6159c9db58835c926644) >> 128;
    if (absTick & 0x20 != 0) ratio = (ratio * 0xff973b41fa98c081472e6896dfb254c0) >> 128;
    if (absTick & 0x40 != 0) ratio = (ratio * 0xff2ea16466c96a3843ec78b326b52861) >> 128;
    if (absTick & 0x80 != 0) ratio = (ratio * 0xfe5dee046a99a2a811c461f1969c3053) >> 128;
    if (absTick & 0x100 != 0) ratio = (ratio * 0xfcbe86c7900a88aedcffc83b479aa3a4) >> 128;
    if (absTick & 0x200 != 0) ratio = (ratio * 0xf987a7253ac413176f2b074cf7815e54) >> 128;
    if (absTick & 0x400 != 0) ratio = (ratio * 0xf3392b0822b70005940c7a398e4b70f3) >> 128;
    if (absTick & 0x800 != 0) ratio = (ratio * 0xe7159475a2c29b7443b29c7fa6e889d9) >> 128;
    if (absTick & 0x1000 != 0) ratio = (ratio * 0xd097f3bdfd2022b8845ad8f792aa5825) >> 128;
    if (absTick & 0x2000 != 0) ratio = (ratio * 0xa9f746462d870fdf8a65dc1f90e061e5) >> 128;
    if (absTick & 0x4000 != 0) ratio = (ratio * 0x70d869a156d2a1b890bb3df62baf32f7) >> 128;
    if (absTick & 0x8000 != 0) ratio = (ratio * 0x31be135f97d08fd981231505542fcfa6) >> 128;
    if (absTick & 0x10000 != 0) ratio = (ratio * 0x9aa508b5b7a84e1c677de54f3e99bc9) >> 128;
    if (absTick & 0x20000 != 0) ratio = (ratio * 0x5d6af8dedb81196699c329225ee604) >> 128;
    if (absTick & 0x40000 != 0) ratio = (ratio * 0x2216e584f5fa1ea926041bedfe98) >> 128;
    if (absTick & 0x80000 != 0) ratio = (ratio * 0x48a170391f7dc42444e8fa2) >> 128;

    if (tick > 0) ratio = type(uint256).max / ratio;

    // this divides by 1<<32 rounding up to go from a Q128.128 to a Q128.96.
    // we then downcast because we know the result always fits within 160 bits due to our tick input constraint
    // we round up in the division so getTickAtSqrtRatio of the output price is always consistent
    price = uint160((ratio >> 32) + (ratio % (1 << 32) == 0 ? 0 : 1));
  }

  /// @notice Calculates the greatest tick value such that getRatioAtTick(tick) <= ratio
  /// @dev Throws in case price < MIN_SQRT_RATIO, as MIN_SQRT_RATIO is the lowest value getRatioAtTick may
  /// ever return.
  /// @param price The sqrt ratio for which to compute the tick as a Q64.96
  /// @return tick The greatest tick for which the ratio is less than or equal to the input ratio
  function getTickAtSqrtRatio(uint160 price) internal pure returns (int24 tick) {
    // second inequality must be < because the price can never reach the price at the max tick
    require(price >= MIN_SQRT_RATIO && price < MAX_SQRT_RATIO, 'R');
    uint256 ratio = uint256(price) << 32;

    uint256 r = ratio;
    uint256 msb = 0;

    assembly {
      let f := shl(7, gt(r, 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF))
      msb := or(msb, f)
      r := shr(f, r)
    }
    assembly {
      let f := shl(6, gt(r, 0xFFFFFFFFFFFFFFFF))
      msb := or(msb, f)
      r := shr(f, r)
    }
    assembly {
      let f := shl(5, gt(r, 0xFFFFFFFF))
      msb := or(msb, f)
      r := shr(f, r)
    }
    assembly {
      let f := shl(4, gt(r, 0xFFFF))
      msb := or(msb, f)
      r := shr(f, r)
    }
    assembly {
      let f := shl(3, gt(r, 0xFF))
      msb := or(msb, f)
      r := shr(f, r)
    }
    assembly {
      let f := shl(2, gt(r, 0xF))
      msb := or(msb, f)
      r := shr(f, r)
    }
    assembly {
      let f := shl(1, gt(r, 0x3))
      msb := or(msb, f)
      r := shr(f, r)
    }
    assembly {
      let f := gt(r, 0x1)
      msb := or(msb, f)
    }

    if (msb >= 128) r = ratio >> (msb - 127);
    else r = ratio << (127 - msb);

    int256 log_2 = (int256(msb) - 128) << 64;

    assembly {
      r := shr(127, mul(r, r))
      let f := shr(128, r)
      log_2 := or(log_2, shl(63, f))
      r := shr(f, r)
    }
    assembly {
      r := shr(127, mul(r, r))
      let f := shr(128, r)
      log_2 := or(log_2, shl(62, f))
      r := shr(f, r)
    }
    assembly {
      r := shr(127, mul(r, r))
      let f := shr(128, r)
      log_2 := or(log_2, shl(61, f))
      r := shr(f, r)
    }
    assembly {
      r := shr(127, mul(r, r))
      let f := shr(128, r)
      log_2 := or(log_2, shl(60, f))
      r := shr(f, r)
    }
    assembly {
      r := shr(127, mul(r, r))
      let f := shr(128, r)
      log_2 := or(log_2, shl(59, f))
      r := shr(f, r)
    }
    assembly {
      r := shr(127, mul(r, r))
      let f := shr(128, r)
      log_2 := or(log_2, shl(58, f))
      r := shr(f, r)
    }
    assembly {
      r := shr(127, mul(r, r))
      let f := shr(128, r)
      log_2 := or(log_2, shl(57, f))
      r := shr(f, r)
    }
    assembly {
      r := shr(127, mul(r, r))
      let f := shr(128, r)
      log_2 := or(log_2, shl(56, f))
      r := shr(f, r)
    }
    assembly {
      r := shr(127, mul(r, r))
      let f := shr(128, r)
      log_2 := or(log_2, shl(55, f))
      r := shr(f, r)
    }
    assembly {
      r := shr(127, mul(r, r))
      let f := shr(128, r)
      log_2 := or(log_2, shl(54, f))
      r := shr(f, r)
    }
    assembly {
      r := shr(127, mul(r, r))
      let f := shr(128, r)
      log_2 := or(log_2, shl(53, f))
      r := shr(f, r)
    }
    assembly {
      r := shr(127, mul(r, r))
      let f := shr(128, r)
      log_2 := or(log_2, shl(52, f))
      r := shr(f, r)
    }
    assembly {
      r := shr(127, mul(r, r))
      let f := shr(128, r)
      log_2 := or(log_2, shl(51, f))
      r := shr(f, r)
    }
    assembly {
      r := shr(127, mul(r, r))
      let f := shr(128, r)
      log_2 := or(log_2, shl(50, f))
    }

    int256 log_sqrt10001 = log_2 * 255738958999603826347141; // 128.128 number

    int24 tickLow = int24((log_sqrt10001 - 3402992956809132418596140100660247210) >> 128);
    int24 tickHi = int24((log_sqrt10001 + 291339464771989622907027621153398088495) >> 128);

    tick = tickLow == tickHi ? tickLow : getSqrtRatioAtTick(tickHi) <= price ? tickHi : tickLow;
  }
}

// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.6.0;

import '@openzeppelin/contracts/token/ERC20/IERC20.sol';

/// @dev Credit to Uniswap Labs under GPL-2.0-or-later license:
/// https://github.com/Uniswap/v3-periphery
library TransferHelper {
    /// @notice Transfers tokens from the targeted address to the given destination
    /// @notice Errors with 'STF' if transfer fails
    /// @param token The contract address of the token to be transferred
    /// @param from The originating address from which the tokens will be transferred
    /// @param to The destination address of the transfer
    /// @param value The amount to be transferred
    function safeTransferFrom(
        address token,
        address from,
        address to,
        uint256 value
    ) internal {
        (bool success, bytes memory data) = token.call(
            abi.encodeWithSelector(IERC20.transferFrom.selector, from, to, value)
        );
        require(success && (data.length == 0 || abi.decode(data, (bool))), 'STF');
    }

    /// @notice Transfers tokens from msg.sender to a recipient
    /// @dev Errors with ST if transfer fails
    /// @param token The contract address of the token which will be transferred
    /// @param to The recipient of the transfer
    /// @param value The value of the transfer
    function safeTransfer(
        address token,
        address to,
        uint256 value
    ) internal {
        (bool success, bytes memory data) = token.call(abi.encodeWithSelector(IERC20.transfer.selector, to, value));
        require(success && (data.length == 0 || abi.decode(data, (bool))), 'ST');
    }

    /// @notice Approves the stipulated contract to spend the given allowance in the given token
    /// @dev Errors with 'SA' if transfer fails
    /// @param token The contract address of the token to be approved
    /// @param to The target of the approval
    /// @param value The amount of the given token the target will be allowed to spend
    function safeApprove(
        address token,
        address to,
        uint256 value
    ) internal {
        (bool success, bytes memory data) = token.call(abi.encodeWithSelector(IERC20.approve.selector, to, value));
        require(success && (data.length == 0 || abi.decode(data, (bool))), 'SA');
    }

    /// @notice Transfers NativeToken to the recipient address
    /// @dev Fails with `STE`
    /// @param to The destination of the transfer
    /// @param value The value to be transferred
    function safeTransferNative(address to, uint256 value) internal {
        (bool success, ) = to.call{value: value}(new bytes(0));
        require(success, 'STE');
    }
}

{
  "compilationTarget": {
    "contracts/SwapRouter.sol": "SwapRouter"
  },
  "evmVersion": "istanbul",
  "libraries": {},
  "metadata": {
    "bytecodeHash": "none"
  },
  "optimizer": {
    "enabled": true,
    "runs": 1000000
  },
  "remappings": []
}